PHILIPS HeartStart HS1 Ref. 1959884

Philips HeartStart HS1 OnSite Defibrillator

• Calm, clear voice instructions are tailored to the responder’s actions, providing guidance during the resuscitation of a sudden cardiac arrest victim
• Clear, graphics-based visual instructions support vocal instructions, ensuring that minimum reading is required when time is of the essence
• Smart biphasic therapy safely delivers maximum shock strength, using a unique combination of high current to maximise effectiveness and lower energy dose to minimise side effects
• Studies have shown that CPR is even more vital to a victim’s survival and rapidly delivering a shock after chest compressions is critical
• The AED’s Quick Shock feature reduces the time between hands-off and shock delivery
• The unit is easy to operate and simply turns on with an easy-to-use pull handle
• Provided with pre-connected SMART pads, which are also tested for readiness
• The pads sense when they have been applied to the patient’s skin, helping the HeartStart know at what stage of resuscitation the user is at
• Philips Heartstart Smart Pads Cartridge – Adult and Philips Heartstart Smart Pads Cartridge – Infant available
• Ensure your defibrillator has optimal battery life by having a replacement Philips Battery Pack for FRx & HS1 Defibrillator in stock
• Summary of the key features
• Heart-rhythm assessment provided by SMART Analysis technology
• SMART Biphasic energy delivery
• Can be used on children (using the paediatric pads available separately)
• Clear voice instructions including CPR coaching
• Quick Shock ability enables the unit to deliver shock therapy rapidly after CPR
• SMART electrode pads detect when they have been removed from the cartridge
• Daily self-tests check electrical the components, subsystems and battery
• Ready light shows when the defibrillator is ready for use
• IPx5 protection rating (please see our AED buying guide for what this means)
• Technical Specifications
• Battery: 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
• Capacity: Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
• Install-by Date: Battery is labeled with an install-by date of at least five years from date of manufacture
• Standby Life: Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)
• Waveform: SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
• Defibrillation peak current – Adult: 32 A (150 J nominal) into a 50 ohm load
• Defibrillation peak current – Pediatric: 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
• Quick Shock: Able to deliver a shock after the end of a CPR interval, typically in eight seconds
• Shock-to-Shock Cycle Time: Typically less than 20 seconds between shocks in a series
• Voice Instructions: Detailed voice messages guide responder through use of the defibrillator
• CPR Guidance: Instructions for adult and infant/child CPR available at user selection
• Shock Delivery: Via adhesive pads placed on patient’s bare skin as illustrated on pads
• Controls: Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
• Indicators: Ready light, blue i-button, caution light
• Standby Temperature: 0 – 43 °C (32 – 109 °F)
• Operating Humidity: 0 to 95 % relative humidity (non-condensing)
• Standby Humidity: 0 to 75 % relative humidity (non-condensing)
• Standby Altitude: 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft
• EMI (Radiated/Immunity): Meets EN55011 Group 1 Level B Class B and EN61000-4-3
• Operating Temperature: 0 – 50 °C (32 – 122 °F)
• Operating Altitude: 0 to 4,500 m (0 to 15,000 ft)
• Shock/Drop Abuse Tolerance: Withstands 1 meter drop to any edge, corner, or surface
• Vibration: Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
• Automated and User-activated Self-tests: Daily Automatic Self-tests
• Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
• Pads Integrity Test: Specifically tests readiness-for-use of pads (gel moisture)
• Battery Insertion Test: Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
• Status Indicator: Blinking green “Ready” light indicates ready for use. Audible “chirp” indicates need for maintenance
• Data Recording and Transmission: Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
• Data Stored: First 15 minutes of ECG and the entire incident’s events and analysis decisions