ZOLL AED Plus Ref. 1897509

Zoll AED Plus Features
The Zoll AED Plus is equipped with Real CPR Help technology. The sensor in the pads lets the AED see each chest compression and lets you know how you’re doing. It guides you, with prompts and a real-time bar gauge, to the recommended depth and rate of compressions. The Zoll AED Plus was the first automated external defibrillator (AED) that guides rescuers through the complete chain of survival.

Lid that acts as passive airway support to maintain the victim’s open airway.
A back-lit display screen that provides a simultaneous text with every audio prompt.
Real CPR Help that helps rescuers provide optimal CPR.
Low cost of ownership.

Zoll AED Plus Specifications
Dimensions
Height: 5.25” (13.3 cm)
Width: 9.5” (24.1 cm)
Depth: 11.5” (29.2 cm)
Weight: 6.7 lbs (3.1 kg)

Defibrillator
Waveform: ZOLL Rectilinear Biphasic
Defibrillator Charge Hold Time: 30 seconds
Energy Selection: Automatic pre-programmed selection (Adult Model: 120J, 150J, 200J; Pediatric Mode: 50J, 70J, 85J)
Patient Safety: All patient connections are electrically isolated
Charge Time: Less than 10 seconds with new batteries
Electrodes: ZOLL CPR-D pads, Pedi pads II, or stat pads II
CPR: Metronome Rate: Variable 60 to 100 CPM
Depth: 3/4” to 3”; 1.9 to 7.6 cm
Defibrillation Advisory: Evaluates electrode connection and patient ECG to determine if defibrillation is required. Shockable Rhythms: Ventricular fibrillation with average amplitude >100 microvolts and wide complex ventricular tachycardia with rates greater than 150 BPM for adults, 200 BPM for pediatrics. For ECG Analysis Algorithm sensitivity and specificity, refer to AED Plus Administrator’s Guide.
Patient Impedance Measurement Range: 0 to 300 ohms
Defibrillator: Protected ECG Circuitry

Display
Display Format: Optional LCD with Moving Bar
Size: 2.6” x 1.3”; 6.6 cm x 3.3 cm
Display Sweep Speed: 25 mm/sec; 1”/sec
Batteries
Type: User-replaceable batteries. 10 Type 123A Photo Flash lithium manganese dioxide batteries.
Battery Capacity: Typical new (20°C) = stand-by life with batteries installed: 5 years (300 ±5 continuous shocks: 250 ±5 shocks before change battery” indicator and 50 ±5 shocks after change battery” indicator) or 13 hours of continuous monitoring time. For AED Plus units running software version 5.32 or higher, replace batteries every 5 years, or if unit prompts. For earlier versions, please replace batteries every 3 years.

PC Requirements
Requirements for Configuration and Patient Data Recovery: Windows 98, Windows 2000, Windows NT, Windows XP, IBM compatible PII with 16550 UART (or higher) computer. 64MB RAM. VGA monitor or better. CD-ROM drive. IrDA port. 20MB disk space.