Fritsch PULVERISETTE P-19-L/P-19 Schneidmühlenkomb Ref. 1940188

Suitable for comminution of extremely heterogeneous samples. Max. Feed size: (depends on material) 120 x 85 mm Maximum flow rate: (depending on the material and sieve size) 60 l / h Final fineness: (depends on sieve insert) 0.25 to 6 mm rotor speed. 300/2800 U / min Scope The granulator can combine mince to a final fineness of 500 microns to 2 liters of sample in a single step of 30 mm. Within 5 minutes, is a representative split analysis quantity. The combination is used among other things for the preparation of heterogeneous materials for analysis by TA municipal waste (TOC) or for condensing and chlorine determination. It also completely heterogeneous samples such as household waste, construction waste, DSD bales or light shredder fraction can be prepared from the car recycling. Operation The cutting mill combination consists of the power cutting mill PULVERISETTE 25 and universal cutting mill PULVERISETTE 19. In the PULVERISETTE 25, the entire sample is pre-shredded. The pre-crushed sample falls through a funnel on a sample divider, the default in the ratio of 1 sample: 13 shares. The split ratio is variable. Performance features fully automatic two-stage crushing sample extraction via cyclone in samples glass tool-free removal of the grinding parts minimal dead spaces integrated sample division to the amount of reduction for the fine grinding of cooling of the sample during milling moisture content of the samples up to 30% of high material throughput Property under item number 19.5030.00 Offer Cutting Mill Combination is a standard granulators combination that has been compiled for universal application. Composed of: Power Cutting Mill PULVERISETTE 25 with 3 liters Einfülll funnel, Universal Cutting Mill PULVERISETTE 19, interposed sample divider, frame and sample exhauster with cyclone, including carbide tungsten carbide cutting tools and sieve cassettes made of stainless steel. The Cutting Mill Combination PULVERISETTE 25 – PULVERISETTE 19 can be equipped with any kind of cutting tool sets and sieve cassettes available for the PULVERISETTE 25 and PULVERISETTE 19. This allows the user an individual compilation of his granulators combination specially tailored to ist application.